Installation Steps for the Nokia 5310
For 1st time set up instructions only:

Bluetooth has to be on before starting steps below:
Hold down the silver smiley face button for the Bluetooth accessory for a couple of seconds until it is flashing blue & red (count to 3) and when it does it means you have paired your phone.

1. Click on Menu

2. Click on Settings

3. Click on Connectivity

4. Click on Bluetooth and turn it on

5. Click on Search For Audio Enhancement (it will begin searching for devices)

6. When search has been completed it will show you all Bluetooth’s in the area that have been found

7. Click on yours 8131 (Milos-9) and it will start pairing (connecting)

8. If asked for a password it is 0000 (shows up as xxxx)

9. It will say connected and click on back until you are into your menu settings

10. Make a call - you are now able to make a call and use your Bluetooth headset – your phone should beep 2x

11. Once you have paired your phone; you will show the Bluetooth symbol on the top of your phone at all time – when it is not there; you will have to pair your phone and do the above steps again – check active devices to see if you have your Bluetooth device active

12. To disconnect – just hold down the silver smiley face until it turns off and it will say “disconnected on your cell phone”

*Remember when the flashing light is only blue – you will have to hold it down until its red & blue in order for Bluetooth to be paired – connected.

*To increase or decrease volume use the +/- on the sides of the Bluetooth.

Top

Installation Steps for the Nokia 6085
For 1st time set up instructions only:

Bluetooth has to be on before starting steps below:
Hold down the silver smiley face button for the Bluetooth accessory for a couple of seconds until it is flashing blue & red (count to 3) and when it does it means you have paired your phone.

1. Click on Menu

2. Click on Settings

3. Click on Connectivity

4. Click on Bluetooth and turn it on

5. Paired to new devices – click on Yes

6. It will say searching – beep once when found

7. Paired devices – click on 8131 (Milos-9)

8. Password is always 0000 (shows up as xxxx)

9. It will say paired with device

10. It will say allow this device to automatically pair – click yes – click connect

11. Make a call - you are now able to make a call and use your Bluetooth headset

12. Once you have paired your phone; you will show the Bluetooth symbol on the top of your phone at all time – when it is not there; you will have to pair your phone and do the above steps again – check active devices to see if you have your Bluetooth device active

13. To disconnect – just hold down the silver smiley face until it turns off and it will say “disconnected on your cell phone”

*Remember when the flashing light is only blue – you will have to hold it down until its red & blue in order for Bluetooth to be connected.

Top

Installation Steps for the Motorola W510
For 1st time set up instructions only:

Bluetooth has to be on before starting steps below:
Hold down the silver smiley face button for the Bluetooth accessory for a couple of seconds until it is flashing blue & red (count to 3) and when it does it means you have paired your phone.

1. Click on Menu

2. Click on Bluetooth Link symbol (blue & white symbol)

3. Click on Add Audio Device

4. When search has been completed it will show you all Bluetooth’s in the area that have been

5. Click on yours 8131 (Milos) and it will start connecting

6. If asked password is always 0000

7. It will say completed and start seeking and say connected

8. Make a call - you are now able to make a call and use your Bluetooth headset

9. Once you have paired your phone; you will show the Bluetooth symbol (blue & white) on the top of your phone at all time – when it is not there; you will have to pair your phone and do the above steps again

10. Once you have paired your phone; you will show the Bluetooth symbol (blue & white) on the top of your phone at all time – when it is not there; you will have to pair your phone and do the above steps again

11. To disconnect – just hold down the silver smiley face until it turns off and it will say “disconnected on your cell phone”

*Remember when the flashing light is only blue – you will have to hold it down until its red & blue in order for Bluetooth to be connected.

Top